Bronco Forum - Full Size Ford Bronco Forum banner

1 - 13 of 13 Posts

·
Try it now!!
Joined
·
9,115 Posts
Discussion Starter #1
This is the stock oil cooler from a Ford 460. The adapter bolts onto the block, and the oil filter screws onto the adapter just like normal. It can be rotated to accomodate interference from the crossmember.

The oil cooler is about 10 inches by 6 inches in area. Asking $70 dollars shipped.
 

Attachments

·
Wrenching for a Livin'
Joined
·
6,949 Posts
Will this work on a 460 only or other engines as well?
 

·
Registered
Joined
·
188 Posts
not on a 460 it has a threaded insert. block uses a pipe thread not a std. 1/2 x 20 or something
was asking about the threaded adapter. that is what i need lost mine in the move.
 

·
shibby
Joined
·
4,826 Posts
not on a 460 it has a threaded insert. block uses a pipe thread not a std. 1/2 x 20 or something
was asking about the threaded adapter. that is what i need lost mine in the move.
c9az-6890-a

Your local dealer should have it in stock, MSRP is $8
 

·
shibby
Joined
·
4,826 Posts
Ah, well since the setup has been sold- I can step in now as I didn't want to interfere with the sale. I have the exact same setup that I'll sell for the same price. Cooler, lines and adapter w/bolt.
 
1 - 13 of 13 Posts
Top