Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
27 Posts
I cant really help with the dust shield, but depending on how bad the spindle is, you will probably be ok. If it wasn't galled to much and there are no high spots. Any high spots will "cock" the bearing. I havent done it, but to replace the spindle looks like a pain in the ass.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top