Full Size Ford Bronco Forum banner

1 - 20 of 277 Posts

·
Registered
Joined
·
8,391 Posts
Discussion Starter #1
Here's where the idea came from.

The rules are pretty simple. I'm offering up some stuff I have no use for. If you want to claim anything off the list, you must offer up something to the group as well.

I think it's easiest if we keep it to a first come, first serve basis.

If there's something you want, make sure you quote that person's list, before starting your own. Then it's probably best to shoot that person a PM, so shipping arrangements can be worked out.

The idea is to help others, so lets try to keep the items listed Bronco/F-series related....This isn't a requirement though. Just use some common sense.

Shipping is at the discretion of the owner. It's probably best, if you attach shipping requirements to your list.

This isnt a "for sale" thread, so I dont want PM's from people trying to buy this stuff from me.

Lets keep this fun, and maybe help out a few others along the way.:beer
 

·
Registered
Joined
·
1,249 Posts
Like I said yesterday, I'll get things started.

Rough Country 3" AAL's
80-96 bronco/f150.

Rochester 30# injectors
These were pulled from an '89 GT mustang, and have about 5000 miles on them.

Professional Products 75mm throttle body adapter
It'll fit a car style intake.

BW-1356 shifter boot
Great condition.


I'll cover shipping on anything.


If you want any of this, post up:thumbup
I can make use of the AAL's. I'll go through my parts pile to see what I can offer up in return a little later.
 

·
Registered
Joined
·
8,391 Posts
Discussion Starter #4
I can make use of the AAL's. I'll go through my parts pile to see what I can offer up in return a little later.
Maybe I should add another wrinkle to the rules.
Let's not claim anything, without having a good idea on the stuff we want to get rid of.
I think that gives everyone a fair shot.

Obviously I'd let this one go, b/c I didnt specify at the beginning.

Would this take the fun out of it?
 

·
CheeseBurger Milkshake!!
Joined
·
3,760 Posts
Set of long tube headers for a 300L6--Hedman Headers Part#HED-89300.--GONE

Complete set of emblems off my 81'Bronco.

Chilton's Manual for 1979-86 Ford Mustangs/Capri.

Quick Fit Tire chains-Fits 205/215R14 thru 225/60R15--215/60R16.
 

·
Registered
Joined
·
2,894 Posts
I have 2 hub assemblies for 5 on 5.5 used

I have one spindle for 80-90 Needs to be cleaned up a bit but perfect condition

I Also have A used coarse spline 1330 slip Yoke from a 79 F-150 front drive shaft.

1 Extra set of stock shackles from a Bronco

8.8 Trac lock carrier, has bad spider gears but i have good spiders that come with it. all you have to do is swap them out and you got a 31 pline trac-lock good to go

Brake rotor and spindle for 87-88 top hat style hubs used




Pics available upon request
You pay the shipping (Some negotiations possible)
 

·
BurnedB's competition.
Joined
·
2,040 Posts
Set of long tube headers for a 300L6--Hedman Headers Part#HED-89300.

Complete set of emblems off my 81'Bronco.

Chilton's Manual for 1979-86 Ford Mustangs/Capri.

Quick Fit Tire chains-Fits 205/215R14 thru 225/60R15--215/60R16.
I can take the emblems and Headers off your hands.

I have
- a pair of 15x10 white spoke steel rims (5x5.5 ford pattern)
- a whole '88 F-150 that is going to scrap soon
- a whole 300ci I-6 in pieces
- Brand new rebuilt 1bbl carb for 300ci
 

·
Registered
Joined
·
1,683 Posts
Rubber distributer boot from a mustang 5.0 Brand new from ford. Been sitting in my parts box for a year but never used.
I'll take it.

- a whole '88 F-150 that is going to scrap soon
Do you have the passenger side headlight / turn signal assembly?

I gots the following

(2) 351W exhaust manifolds Left over from putting on headers. No cracks.

Brake booster The stocker off my 89, worked great 2 months ago

F-350 Master Cylinder Came off Shadowcaster's 89. I CANNOT guarantee if this works, but Shadowcaster did assure me it works.

Exhaust tubing About 25' of 2.5" flex exhaust tubing.

Fuel pump heat shield The small piece of metal that wraps around the high pressure fuel pump on the frame rail and is bolted to the frame. Won't work with my headers.

You pay shipping and any of this can be yours.

We need to get Steve83 to join this. Imagine the stuff laying around his place.
 

·
Registered
Joined
·
959 Posts
ive got a center console from i believe a 86 bronco but will fit all the way til 91. its tan. ill pay half the shipping you pay for the other half and its all yours.
 

·
Banned
Joined
·
1,692 Posts
well i'm gonna do some digging after this weekend, but one thing i know for sure that has been collecting dust for some time is the stock spare tire cover

it hasn't fit over my spare in some time
 
1 - 20 of 277 Posts
Top