Bronco Forum - Full Size Ford Bronco Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
647 Posts

·
Registered
Joined
·
173 Posts
hay look at www.swracecars.com they have a 8 or a 10 point cage for the full size bronco's.there in Pa. the part # for the 8 point:11-3060 the part # for the 10 point:11-3560 they are pre bent all you have to do is weld it in. phone # is 1-800-523-3353 they are around $250.00
 

·
Registered
Joined
·
39 Posts
Bronco Graveyard also offers a cage kit for said Bronco. It ran me $320 plus shipping. Its made by Smittybuilt. Only draw back is it took a long ass time to get. Hope it helps.

B.
 

·
Registered
Joined
·
267 Posts
squints68 said:
hay look at www.swracecars.com they have a 8 or a 10 point cage for the full size bronco's.there in Pa. the part # for the 8 point:11-3060 the part # for the 10 point:11-3560 they are pre bent all you have to do is weld it in. phone # is 1-800-523-3353 they are around $250.00
S&W racecars does have a decent roll cage kit. There's a little more to it than just welding it in. You might want to search for other members experiences. There is a fair amount of fitting still to be done. The cost also does not include shipping which is something else you'd want to look at. The tubing is good, thick wall tubing, but heavy when shipped.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top