gas tank armour
1 - 2 of 2 Posts
Joined
·
4,775 Posts
i have seen something built that looked close to bullet proof. but i have never seen anything commercially available. can you weld? of do you have access to a welder or someone that can make you one? i think the guy that made it, posted plans or measured drawing. it looked simple & straight forward. shouldnt be that expensive if you look at the steel costs.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Asking for help with no start.
Noobie Bronco Tech Questions. Flame free zone!I just recently got another 1990 bronco with a 351, and it started when i bought it then drove it 30 miles, parked it overnight and then tried to start it, it cranks revs up and them back down then continues to crank. It has a new distributor, plugs, wires, ignition switch, coil, fuel pump and...- 8
- 84
-
We are learning
Noobie Bronco Tech Questions. Flame free zone!As many of you already know my Son and I are new Bronco owners. We are excited to learn and do as much as we can ourselves with our new Bronco. I wanted to take it to a mechanic that is good family friend of ours to have it initially looked over. Our newly acquired Bronco had been parked in a...- 21
- 856
-
JoelS · updated
-
'88 TO '96 F-150/250/350 TAILGATE ON A '94 BRONCO
Noobie Bronco Tech Questions. Flame free zone!Someone posted here awhile back that they're straight bolt on. Has anyone done this? Does it latch just like a Bronco tailgate?- 6
- 94
-
CDA 455 · updated
-
Rear Bumper
Noobie Bronco Tech Questions. Flame free zone!Does anybody have recommendations for an aftermarket rear bumper option in black that won't break the bank?- 0
- 0
-
JoelS · updated
-
Ignition Problem
Noobie Bronco Tech Questions. Flame free zone!I replaced the ignition switch and the ignition lock cylinder, but I can't get it to turn over via key. I have to jump the solenoid by the battery. Any thoughts on what the issue could be? Edit: It's an '86 Bronco XLT- 2
- 32
-
Spence_A_R · updated
Join now to ask and comment!