[Crazed]

Had to re-do the hand throttle..(melted the old one..)
so here is a pic

 

[Bronkzilla]

got any pics of the rest of the setup...

 

[Crazed]

Sure do...here goes..

Got this from the local schwinn dealer

I mounted it right to the t-case shifter

Drilled a hole right here...

Comes up with the other cables

And the end that does the work..

:toothless

 

[Bronkzilla]

thanks.... i could have used that last night in the limo..

 

[Crazed]

What happened?

 

[Drilim]

thanks.... i could have used that last night in the limo..

had to idle by some nekkid cali girls?

Who would have thought that Tim would take pictures and come through with a great no writing-write up. Thanks.

Where would you recommend mounting a hand throttle when i have the push button TC?

 

[Bronkzilla]

What happened?

charging up the t-bird's battery which had not been used in who knows how long..

 

[Crazed]

Who would have thought that Tim would take pictures and come through with a great no writing-write up. Thanks.

Where would you recommend mounting a hand throttle when i have the push button TC?

You dont like that writeup?

good question on where to put it...Hmmm..let me think on that...

 

[Ogeechee 4x4]

i am SOOO gonna have to copy that... hope you don't mind, tim :beer

 

[Crazed]

Copy away!!! I copied it from some heep guy I found a while back.

 

[Andy351]

Where would you recommend mounting a hand throttle when i have the push button TC?

put one of these on the center console

 

[Davids78Bronco]

Where would you recommend mounting a hand throttle when i have the push button TC?

What about having a short length of 3/4" round stock welded perpendicular to a small piece of flat bar? That way, it could be mounted anywhere - floor, dash, hose-clamped to the steering column

 

[Fireguy50]

Where would you recommend mounting a hand throttle when i have the push button TC?

Get a manual t-case :duh

 

[Crazed]

What about having a short length of 3/4" round stock welded perpendicular to a small piece of flat bar? That way, it could be mounted anywhere - floor, dash.

Good Idea...something like that :toothless

 

[Ogeechee 4x4]

you've got a good reason to swap over to a manual x-fer case now... :thumbup

 

[Drilim]

put one of these on the center console

I would, But it would be a fairly easy place to bump it or knock it...


Hmmmm....Im brainstorming now...

And Tim, I did like the write up. Even tho there wasnt any actual writing

 

[Crazed]

Theres words in there...look closer

 

[Crazed]

BTW..whan I replaced the cable today, I went with a 7'cable, made it easier to route away from the engine

 

[Drilim]

Theres words in there...look closer

Excuse the stupidity. Been a long, stressful day.

 

[Crazed]

:lolup :lolup :thumbup :thumbup :toothless