Bronco Forum - Full Size Ford Bronco Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
334 Posts
Discussion Starter · #1 ·
Have a question on Manuel Hub

My Drivers side hub makes a grinding like noise when it's under pressure. And when it's just locked. Also if it's locked and not in 4 wheel drive it still makes noise. It still works, and spins. Any help would be much apperciated. :banghead :rockon
 

· Former owner of Shadofax
Joined
·
17,475 Posts
coldsteel1993 said:
My Drivers side hub makes a grinding like noise when it's under pressure. And when it's just locked. Also if it's locked and not in 4 wheel drive it still makes noise. It still works, and spins. Any help would be much apperciated. :banghead :rockon
2nd the bearings guess, but will add to make sure you check the spindle bearing, not just the inner/outer hub bearing. good luck, once you've dug in, let us know/post pics of what you find.
 

· Registered
Joined
·
594 Posts
thejuice said:
2nd the bearings guess, but will add to make sure you check the spindle bearing, not just the inner/outer hub bearing. good luck, once you've dug in, let us know/post pics of what you find.

Yep, that's sounds like what I heard when I crushed my spindle bearings :brownbag I also happened to shear off the shock mount at the same time :toothless
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top