[CTbronco93]

hey - I just bought new headlight assemblies and was looking for any installation details that might help me out. After taking a look it's obvious there's more to removing & replacing than the 2 screws on the top. Any info would be appreciated.

thanks,
Pete

93 Bronco XLT
Milford, CT

 

[94_chickentaco]

Ahh yes. find a small rathet, 1/4 drive and the 11mm deep i believe. there are 4 total If I remember right. And, i had to remove my battery tray to get to the passenger side ones. And I had to take out the windshield juice canister to get to the driver side lowers. Shove yer finga's down in there and you will feel the other 2 little bolts. Good luck.

 

[94 XLT BRONCO]

I sent you a PM explaining how I did it.

 

[FordbyFord]

Hey 94 you think you could send me something to help me out with my headlight install?

 

[Steve83]

If you had searched, you'd have found the dozen OTHER times I've posted this:

 

[rugerp89ipsc]

my swap

here's what i did off my supermotors. not great, but if you have any questions, im. I can call you and walk you through it np.

http://www.supermotors.org/vehicles/registry/detail.php?id=9140&s=27866#content

took me a damn long time to figure it out, and it is pretty simple once you see the damn screws behind everything.