Bronco Forum - Full Size Ford Bronco Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
hey guys...

I did a search and came up empty...i have a 93 XLT and was wondering how to get the radio out so i can put in a new one...does the front dash peice just pop off or do i need to remove the trim piece and remove screws? any help would be appreciated...

Ryan
 

·
Super Moderator
Joined
·
26,007 Posts
TurboJ said:
hey guys...

I did a search and came up empty...i have a 93 XLT and was wondering how to get the radio out so i can put in a new one...does the front dash peice just pop off or do i need to remove the trim piece and remove screws? any help would be appreciated...

Ryan
OK....there is a recent thread on this in past week here or in the General section...whatever..here is the info:
http://www.installdr.com/InstallDocs/FLM/PDF/356037.pdf
PULL FUSE 1st (not mentioned in article)
notice the "Ford Radio Tool"; avail at wally mart, pep boys, etc or use the bent hangar method; press outward SLIGHTLY; as shown.
:thumbup
 
1 - 3 of 3 Posts
Top