Bronco Forum - Full Size Ford Bronco Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
230 Posts
Discussion Starter #1
I just started to recently notice that my truck is hesitating on mid-heavy acceleration. It doesnt do it with slow acceleration but when i have to punch it or go on the highway it hesitates. On the highway i can barely keep it up to speed. Ive replaced the vapor canister, cleaned the throttle body and IAC, replaced the TPS and the fuel filter. I replaced all my ignition parts with accel wires, plugs, coil, rotor and cap. I tried pulling codes and nothing. What can I do to solve this issue?
 

·
Premium Member
Joined
·
3,944 Posts
is the cat cloged up? clean the fuel system with some sea foam. re-check timing is set correct.
 

·
I scrape on both sides
Joined
·
3,035 Posts
better yet.. cut the cat out and put a straight pipe in place of it.. no worries then about a clogged cat :)
this :toothless

however you'll notice a loss of power due to no back pressure....

also is you throttle cable frayed/damaged in any way?
 

·
Registered
Joined
·
12 Posts
Did you ever find a solution to your issue? I have a very similar problem.

86 Bronco hesitates and bucks on acceleration. No power going uphill. Top speed about 55 MPH. I've cut out the catalytic converters.
 

·
I scrape on both sides
Joined
·
3,035 Posts
do a fuel pressure gauge
 
1 - 6 of 6 Posts
Top