Bronco Forum - Full Size Ford Bronco Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
274 Posts
Discussion Starter · #10 ·
Why yes I am a *******. :toothless

Soft Top Bronco- The pipe was just a universal 4 inch pvc Y pipe and I glued some pieces to it which neck it down so the stock hoses clamp on to it. I had to cut a slit on the end of the stock rubber hoses to fit for now and then taped the holes but I will buy some universal tubing soon. The oil breather tube has the filter on the end and it just rests on the fender, there is no emissions tests in Ellensburg. However if you needed it to pass emisions it would not be hard to drill a hole into the pvc and attatch it there.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top