Bronco Forum - Full Size Ford Bronco Forum banner
1 - 2 of 2 Posts

·
Registered
1992 5.0 4x4 Eddie Bauer E4OD
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a ground loop going to the hot Red/Light Blue wire on the fender Solenoid. I do not get 12v when turning the key. I thought the output R/L-B from the ignition switch was bad but it is not.
Solenoid works otherwise if I jump it out or across the two posts.
The only other point in the circuit is the Neutral Safety switch on the trans. The starter solenoid Red hot wire is not in ground loop.
 

·
Registered
1992 5.0 4x4 Eddie Bauer E4OD
Joined
·
2 Posts
Discussion Starter · #3 ·
Thank you for the information, I've found the wiring damage and was able to get the issue resolved.
 
1 - 2 of 2 Posts
Top