[Fitzy]

I am located in Lisle, Illinois. I have Craigslist ads opened for all of these items, so feel free to contact me through those listings. I may not be the most responsive on this forum, but will check a few times a week and will honor first-come-frist-serve. I prefer local pickup for all parts, but don't have an issue shipping small parts. I may consider shipping larger parts if you setup the shipping and pay for it. Some parts may fit 1980-1996 models, some may only fit 1992-1996 models. No returns; if you want more pictures then please ask.

Prices are negotiable.

Items For Sale

Item	Price	Images	Sold?
OEM Running Boards. They could use a good paint, some new bolts, and one of the brackets needs to be expoxied on again. None of the fiberglass is cracked, and they come with the original rubber step pads	$250	Spoiler: Click to see images	No.
Original black/silver tailgate finishing panel trim. It is in pretty good condition, a couple (recent) scratches on the bottom, but nothing that couldn't be buffed out. Does not include the mounting hardware.	$150	Spoiler: Click to see images	YES.
Overhead console. Please be aware that it does not come with the lights or a working circuit board. Some idiot (me) messed up soldering a new capicator, it may be salvageable. The circular plastic for the front mounting screw is broken but usable (epoxied+taped for now).	$75	Spoiler: Click to see images	No.
Overhead console mount. No clips or screws included.	$30	Spoiler: Click to see images	No.
Rear bench seat. This is the 1996 Eddie Bauer version, which I believe is marketed as the mocha color. I'm not 100% sure. It is leather. There are minimal small scratches in the leather. The carpeting on the back is mostly unharmed. I can provide some of the mounting hardware as well. Sorry for the awful pictures, this is currently stored a few hours away so I couldn't take any on demand.	$200	Spoiler: Click to see images	No.
Rear passenger floor mat. Carpeted. Matches the Bronco carpet color. I think this is actually a pretty rare part. Decent condition, no major stains. No rips visible from the top.	$40	Spoiler: Click to see images	No.
Hard top windows with gaskets. When they were installed I never had any issues with leaks. They were not forcefully removed. There is a tint applied to the windows that is scratched in some places.	$200	Spoiler: Click to see images	No.

Table continued in first comment.

 

[Fitzy]

Items For Sale Table Continued

Item	Price	Images	Sold?
Rear seat belt assemblies. Fairly dirty, some scratches on the seat belt fabric but nothing deep. Let me know if you want pictures with closer detail of the seat belt fabric. Mounting hardware included if I can find it.	$50	Spoiler: Click to see images	No.
Tan sun visors. Both have lighting and mirrors. One has a fold on the corner. They both have some fading due to the sun	$75	Spoiler: Click to see images	No.
Tailgate torsion bar and mounts. These can be found as aftermarket parts, but I also have the torsion bar hook that cannot be found anywhere online. I will throw in the hook for the right price, no picture or price listed for the moment.	$50	Spoiler: Click to see images	No.
3 cargo net knobs. I have no clue where the fourth went. They have some fairly deep scratches and stains, but these are still rare parts. No, I do not have the cargo net - I am convinced it was a myth.	$15	Spoiler: Click to see images	No.
Center console cup holder insert. Yes, seriously a cupholder insert. Goes for between $20-$25 online.	$10	Spoiler: Click to see images	No.
Hardtop coat hooks. Like the rest of my listed parts, these are the mocha/tan color for the '96 Eddie Bauer Bronco. Screws and coats not included. I think LMC Truck lists them as #40-2704	$15	Spoiler: Click to see images	No.
2x used Kenda Klever M/T Tires 32X11.50R15 KR29 (#290002). Good amount of tread left. Fit my Bronco on 15" wheels with no rubbing. Will not ship.	$150	Spoiler: Click to see images	No.

 

[KCD]

You don’t have those springs for the rear bench seat do ya? Still haven’t made it to Farm supply store to look for tractor seat springs....

 

[Fitzy]

You don’t have those springs for the rear bench seat do ya? Still haven’t made it to Farm supply store to look for tractor seat springs....

A few years ago I ended up having to drill out the seat mounting bolts and cut the springs in the process. I bought some heavy duty springs as replacements, they were a bit too long so I had to snip them. This left them not flat on top, so they aren't the kindest to the bottom of the seat. No rips, just some marks. They work fine and I can sell you them, but if you are going to buy your own then go with these approximate dimensions.

1.25-1.5" OD
2.5-3" free length
.234" thick was probably overkill, you can go thinner
Flat top and bottom

Here is a picture of one spring I have if you want it, I'm sure the other one is around here somewhere...

Spoiler: Click to view image

 

[Fitzy]

Weekly thread bump.

 

[StemCellResearch]

cargo net isnt a myth, i have one lol