Bronco Forum - Full Size Ford Bronco Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
728 Posts
Discussion Starter #1
Here is the drive side:

Here is the coast side:

It is a ford 8.8 with 4.56 gears. Backlash is .016.
It was my first time and I don't want to burn them up. I had the pinion out .010 from these pics and backlash at .013 and the coast side was more in the center depth wise but the drive side was high and at the toe end of the ring gear.
 

·
Registered
Joined
·
728 Posts
Discussion Starter #6
Just to make sure, when you say the drive side you are talking about the first pic? And is the critical part of the pattern the bottom edge of the 'swipe' where the pattern is the most flat?
 
1 - 6 of 6 Posts
Top