Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

· Premium Member
13,585 Posts
What about doing a pressure test with a gauge on the radiator neck first to see where the actual leak is then do the R & R...............? :shocked

I just went thru this a bit myself with my new motor, the Tstat was bleeding out of the bottom and collecting in the pocket on the WP because the gasket in the kit they gave me was like tissue paper, I used Ultra Copper thru out with no problems except this so I drained all the new coolant pulled it a part and put a new gasket using Permatex instead, put it all back together and finally no leaking ~ :chili:

Good Luck ~ :thumbup
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.