[Concept2Steve]

93 bronco Eddie bauer basket case build-
Bought in 2019 after sitting for 6-7 yrs
Over payed for a pile that sat on my side yard for 2 years…
Untill I had all the parts to assemble the sleeper bronco I was dreaming about, deaver q80 springs, cut and turned beams with uniball pivots and 1.25” heimed radius arms and pivot boxes
Add a couple of bucket seats and you have a “finished product” right!?
Like Johnny cash- this truck will be built 1 piece at a time-over a long period of time.

 

[Concept2Steve]

With all the parts sorted and built by me and my brother the install of all the parts took two days

 

[Concept2Steve]

Blasted and prepped the knuckles new moog ball joints and aircraft hardware

 

[Concept2Steve]

beard bucket seat to factory slider adapter for the driver and passenger seat

 

[Concept2Steve]

unfinished plate roof rack designed to be modular and expandable able to be packed and shipped in a 6” shipping tube

 

[Concept2Steve]

billet hub adaptors in process

 

[Concept2Steve]

the finished product-

 

[Concept2Steve]

first trip out- suspension was a success…engine not so much, on the last day a crippling misfire developed. With three days of drive time I have some changes in mind already- rear ride height = trash, need to be lowered even with 200 plus pounds of gear in the back.
Shock package worked well but needs more dampening control for longer runs.

 

[Concept2Steve]

Rear suspension fix in progress- lowered front hanger (to be matched with a chassis notch and bump stop package)
New bolt together 12” shock mount that doubles as a sway bar pivot point

 

[Concept2Steve]

rear axle project- econoline 9” (widest factory 9” housing) bump pads

ISO- vss relocation kit used, cheap or ideas for making my own lol

 

[Concept2Steve]

topend reseal/head rebuild/de-smog
E7 heads resealed with quality parts and new manly valves removed umbrella seals and installed positive type valve seals
Ported heads- intake and exhaust runners with bowl work
Ported intake to gasket match head
Hi flow water pump
Gear drive timing set
And all new paint
Installed rear intake coolant crossover

 

[Concept2Steve]

lowered spare mount by flipping the mount 180 to increase rear window visibility

installed spring lock on tire mount to prevent it from swinging freely

 

[Concept2Steve]

new front beams 4.5 over per side to match rear axle width

original set forsale

 

[Concept2Steve]

second outing-
Ambulance steering doing its job here haha
Rear main seal shitting the bed immediately following this….

 

[Scoop]

Nice work. Your custom parts are amazing.

 

[Desertdawg]

Evolving nicely. Will be watching. Respect the commitment to go 4.5 over. I'm wide in the front and need to bring up the rear. Hunting for an Econo 9".

 

[Burntoutaccountant]

Damn dude. This is nice! I wish I had your skills.

 

[Concept2Steve]

Thanks guys! @Burntoutaccountant @Desertdawg @Scoop
I’m enjoying this bronco so much my f100 has taken a back seat to this project
between my brother and I we have 4 prerunner/race style trucks and keeping them fed is a full time job

 

[Concept2Steve]

rear bumper design I’m playing with, haven’t decided on rear fiberglass yet, depending on what glass I go with I won’t be able to use the factory tire swinger
So options are:
adv fiberglass and keep tire swinger and run with this bumper design
McNeil or fiberwerx move spare in the truck or incorporate a tire swinger into the rear bumper

 

[Concept2Steve]

Next projects will be rear storage (similar to image) and 3/4 cage