[WOOD]

I'm sick of this damn camel color interior in my 89!Can you Guy's put some pics up of the insides of your BKO's and gimme some ideas on what to do too mine?I'm thinking maroon or gray.I'm also thinkin about changing the dash to.Anybody ever changed over to the digital dash in their older model?

 

[ToddACimer]

I suggest porno red it's a great color.

I have porno red with Black Corbeau's

 

[BigBroncoXLT]

My 88

My 85 Before engine removal

After engine removal

Id go for the after removal myself..Lots of room inside!:thumbup

 

[Steve83]

To put in a stock digital dash, you'd have to swap several sensors, do a LOT of rewiring, add some modules, & network them. :shrug It can be done...

 

[cadaver]

then posting a pic of mine probably wont help. Its the camel color in an 87.

 

[WOOD]

To put in a stock digital dash, you'd have to swap several sensors, do a LOT of rewiring, add some modules, & network them. :shrug It can be done...

So you think it's more trouble than it's worth Steve?opc1:

 

[cadaver]

you pull the engine out through the interior? why did you pull the seats and carpet?

 

[WOOD]

I suggest porno red it's a great color.

I have porno red with Black Corbeau's

I dig that red Todd...You got any pics of the rear and some better of the dash and door's?

 

[BigBroncoXLT]

you pull the engine out through the interior? why did you pull the seats and carpet?

To get to that nice access panel that ford put in so I could remove the bellhousing bolts. The tranny is still in the truck.

 

[derrick36]

Painted dash:

Herculined floor:

Coverking, covered Mustang buckets:

I dont have any updated pics. Almost all my trim is painted(black)and back in. I also painted my headliner black.

I'm still working on the doors. I need to get some rust bullet and herculiner on my passenger side door, and reinstall the door panels, which have also been painted black.

I still need to install the rear seat, after I get the coverking cover for it.

 

[Steve83]

So you think it's more trouble than it's worth Steve?

You're asking someone who converted a '94 CV POS from EEC-IV to OBD-II; an '83 Bronco POS from 300c.i. 1 bbl. carb to EEC-IV 4.9L EFI, & a '75 Bronco POS to EEC-IV 5.0L EFI... :shrug

"Worth" is very relative.

I'm just saying it's a lot of work.

 

[Ptack1]

A pic wouldnt help, its camel with water bottles in the back seat.

 

[ben_cline]

New pic for the day:

Autodimming rearview mirror, ugly EB tree seats:

Need to replace visors, or recover them. Removed headliner and just painted it with a cheap roller from Wal-Mart. Cost me about $10 to do. I think it was the perfect red to match the exterior:

Explorer dome light. All the lights fit between Cougars, Thunderbirds, Broncos, F-series. I saw one of those chrome lights like I had before in my friend's 90 Cougar.

Could've done a better job, but it looks better than it did:

Gauge bezel from eBay, stock gauges, Taco Bell packet, and the tweeters with the stock fabric door:

Bezel with aftermarket gauge faces:

Rearview when I had the large sub box:

Stock pic:

 

[turp]

then posting a pic of mine probably wont help. Its the camel color in an 87.

Same here.

 

[Greenmustanggt]

To get to that nice access panel that ford put in so I could remove the bellhousing bolts. The tranny is still in the truck.

NO WAY man.....damn lol i did an engine swap and never knew about any access panel....wow that would have saved me alot of time with the top bolts,,,,,,:banghead

 

[amw_drizz]

Here is my interior



Radio area



Cargo Area

 

[Steve83]

My 83's interior.



I think the dash SHELL is original... :shrug

 

[jimsl78]

My interior freshly "re-installed" with new moulded vinyl floor.

 

[poopy_pants]

Here is mine...

I like the camel color?

O...vinyl floor ROCKS.:rockon

 

[WheelinElvis]

those floor mats that steve83 has kickass. walmart makes a pretty good mat. mine hold mudd and mater really good, and they arent slippery... just redo the whole interior with those mats...
ace