Bronco Forum - Full Size Ford Bronco Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
sorry im having a hard time using the search. i was wondering who here did there lift themselves (ttb). how difficult/how long does it take. what will i need that is not included? pivot bushings, ect... gonna try to do it myself cause i need the $ for gears. dont think 3.08s will jive with 35s. thanks
 

·
Screw the Jeep Thing
Joined
·
4,522 Posts
TTB lifts are very easy. The part that took the longers for me was just taking off the radius arm brackets because of the stupid ass rivets.

Here is my little page on doing mine. It's about 3 years old now. So It's not the greatest.My Lift
 

·
negative creep
Joined
·
8,651 Posts
i did mine. the stupid ****ing rivets are what took the long time. grind off the heads, drill a couple holes through them and knock them out with an air chisel. thats how i eventually did it. and like Bronco85 said, TTB lifts aren't that hard.
 

·
Premium Member
Joined
·
10,513 Posts
did mine too .. in the snow :(

yup, rivets were the hardest part without counting the fact that I had snapped off an axle stud in the TTB arm due to rust ... my superford page has some pics if interested
 

·
Registered
Joined
·
676 Posts
Oscar and I did mine. We started at about 4 in the afternoon by 11 p.m the front was done and the next day it took about 2 1/2 hours to finish the rear

it was fun :thumbup
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top