Bronco Forum - Full Size Ford Bronco Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I cant seem to find a list of code descriptions for obd2 broncos. I am getting:

P0300- Random/Multiple Cylinder Misfire Detected?

P0385- Crankshaft Position Sensor B Circuit Malfunction I think?

P1400- I dunno

Any help would be great. I searched the forums but it was hit and miss as far as obd2 codes. Thanks
 

·
Registered
Joined
·
577 Posts
IIIRC all 3-digit OBD-II codes are universal and the 4-digit are manufacturer specific. I'd search DPFE sensor and EGR valve for problems relating to that code.
 

·
Registered
Joined
·
59 Posts
Airbag Codes

blinks 4 times then a pause then 2 times so i take it the number is 42 am i correct?
Chris,
Had a guy that I used to work with (he used to work at a Ford Dealer) tell me that the connector under the hood on the airbag/crash sensors apparently have moisture in one of the connectors. Mine does that exact same thing if it is damp or has been raining. Give it some time to dry out and the problem goes away. You could probably get some electrical grease and put on the connectors of the crash sensors, but I would disconnect the negative battery cable before removing ANYTHING related to the airbag system. Personally, the occasional airbag blinking light hasn't bothered me near as much as the ABS failure that I haven't had time to fix.
 
1 - 7 of 7 Posts
Top