Milodon oil pan
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Jack storage
Noobie Bronco Tech Questions. Flame free zone!Trying to figure out how to store the jack under the hood? Anybody have any pictures? The manual did not help much. TIA. Sent from my iPhone using Tapatalk- 0
- 0
-
JoelS · updated
-
Converter Stall for RV Cam
Noobie Bronco Tech Questions. Flame free zone!Hi everyone, I have a 93 Bronco 302 E4OD with a RV cam and hot ignition in it. I am rebuilding the transmission, and I am lost as to what stall converter to order. I know that RV cams are “low torque” cams, but the PO put the cam in so I don’t have the specs. Being that it is a low torque cam...- 11
- 245
-
Removing Camber, BIG Problem
Noobie Bronco Tech Questions. Flame free zone!I was am replacing my upper ball joints and when I was removing my camber bushing part of it snapped off. I could get an good enough grip with a pittman puller or 2 jaw puller. So I was hoping if I exposed all the threads by cutting away the bushing I could pound the top to push it out. Well...- 1
- 18
-
lil swapping help
Noobie Bronco Tech Questions. Flame free zone!i picked up a new engine" well fairly new, was told its a 93, but i think its off a year or 2. where would i find block cast numbers? theres no number plate. only thing i found was a sticker on the intake. can i swap it in as is, or do i need to swap over some items, like the tube coming off...- 0
- 0
-
4 low won't work
Noobie Bronco Tech Questions. Flame free zone!Proud new owner of a 96 Ford Bronco a few months back that I'm making upgrades to. I'm also new to this forum and looking for any advice on getting my 4 lo to work. I've tried shifting while in Neutral and I'm not getting anything. 4 High works just fine. I can't find any fuses blown and the...- 9
- 780
-
nealcannon16 · updated
Join now to ask and comment!