Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 6 Posts

· Moderator and Scrounger Extraordinaire
85 Bronco, 309ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
20,229 Posts
I'm in the ballpark of thinking it's a 4" lift, but again, need to verify since I saw another couple of posts with 4" lift + 33" tires, and the wheel well gap looked very similar in both photos.

Not 100% sure where to grab a better picture from, could do it better tomorrow, forecast is said to be sunny.

View attachment 209683


View attachment 209684
The first pic, follow the drivers side axle beam to the left and find the bracket that attaches it to the engine crossmember. Thats the bracket we are talking about. Some have holes for 4 and 6" lifts. From our view, the axle beam is in the lowest hole but the tie rod is blocking the view of where another hole might be.

Just by eye, it looks like a 4" lift.
1 - 1 of 6 Posts