Bronco Forum - Full Size Ford Bronco Forum banner
1 - 3 of 3 Posts

·
negative creep
Joined
·
8,651 Posts
Blaze said:
Does it have blocks on the rear leaves??? If so measure those...:beer
thats not a very accurate way to determine front lift:goodfinge my 4" used 2.5" blocks and it sat level. (the blocks were actually tapered from 2.25-2.5" to help the pinion angle) and most lifts don't lift the rear as much as the front.

measure the coil spring at ride height and compare it to mine. i have a 4" lift.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top