Bronco Forum - Full Size Ford Bronco Forum banner

1 - 7 of 7 Posts

·
Zombie Hunter
Joined
·
13,681 Posts
Start tracing wires man, telecommunications wires are FUUUUUUN too.....real small.

Your going to have to open up the jack, see what striped wires are in there, and trace them back to the main board, then open up the jack that you want to wire in to that line, see what striped wires are in there, and switch the two.

If you weren't in Plano Texas i am just bored enough to come do it for you.
 
9

·
Guest
Joined
·
0 Posts
I was a PBX swith tech for 7 years, i know that stuff cold.

Call a professional. You dont have a punch down tool, toner or butt set and if you jack with it you could nuke a digital phone port.

If you had a punch down tool for that 66 block and could positively identify the pair you needed i could help. What brand phone system is this?
 

·
Registered
Joined
·
694 Posts
I must agree with the Taco here. You are much better off calling a proffesional. I get tired of going to offices that decided to do their own phone work and screwed something up.
 

·
Registered
Joined
·
4,684 Posts
Thirded. If you don't have the right tools, you'd be amazed how much expen$ive damage you can do in a big big hurry.
 

·
Registered
Joined
·
164 Posts
Hey, I recognize you from explorerforum. Is the Bronco a new addition?
 
1 - 7 of 7 Posts
Top