[[email protected]]

Hi,
I'm almost 16 and I was messing around looking for a manual to my Bronco and i was wanting to know how to get the left door power window motor out!
if someone can tell me that would be great.

 

[Jackson112784]

usually people go with 4inch and 33's, some do 35's (usually with 6inch though)

 

[JB]

go to a parts store and buy a haynes manual for your vehicle.

your not going to clear 36's with 4 inches of lift without some trimming. i have 35's with a 4 in and its fine for the street, but the tires are hitting the rear of the front wheel wells at full flex.

 

[El Kabong]

Posts 3 & 4 in this thread have good links for window motor info.

 

[miesk5]

Welcome and good to hear that you want to do some repairs yourself!

 

[BubbaBronco]

Welcome to FSB

 

[89bronc57]

why go with 36s go with 38s or 39.5s

 

[broncoxlt4x4]

The only way that your gonna fit 38s or 40s under a 4" lift is with about 4" of fender hacked away. Plus thats not practical for a DD. If you plan on wheelin this thing do the 4" with 33's or just go 6" and 35's. but thats just me...... good luck and WELCOME!