Bronco Forum - Full Size Ford Bronco Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hey everyone,im keith from GA. just wanted to drop a line and say hey and that yall got a great site here. my ride is a 1983 bronco xlt. i got a 351w with edelbrock heads, intake, cam, 600cfm carb, msd 6a ignition, msd billet distributor,and power forged pistons. its backed by a c-6 trans and a np trans case. also has a 40 series flowmaster split out the sides. tires are bfg 31-10.50s.
 

·
Premium Member
Joined
·
7,409 Posts
Welcome aboard!! :rebelflag

A few things to know:
1. Make sure to vote for FOTM each month by going to the FOTM thread and picking your fav. nominee! (5 new nominees each month, and someday it could be you!)
2. Be sure to vote for this site at TOP4x4 by clicking the link at the top of the page once a day, when you get to the TOP4x4 page, click the “vote for the site I just left” banner. (It brings us in alot of new traffic!) It also lets those “other” wheelers know what rig rules the land! :rockon
3. Post up some pics of your rig!
(click here—>click me, click me!! to find out how!)
4. Add your rig's specs (or a pic) to your sig line. (It comes in handy, when asking questions, for people to know what kinda rig their helping you with!)
5. Before asking a handful of questions please try the search button at the top right hand corner of the page.
This site has been around long enough that ALOT of topics have already been discussed and now all you gotta do is read.

Again, welcome aboard, make your self at home!!!:thumbup


P.S. Where at in Ga?
 

·
Registered
Joined
·
6 Posts
Discussion Starter #7
thanx

just wanted to say hey and thanx for welcoming me in. Iam from jasper, ga, the first city in the mountains, ogeechee.
 

·
Registered
Joined
·
27 Posts
sounds like a nice rig....the edlebrock heads are great heads, I had good luck with the performer rpm's on a sbc 406...made over 500hp..we stuck a set of victor jr's on a another sbc 408 roller motor and with a 175hp nos shot the 4000+lbs 68 chevy truck went 5.93..in the 1/8 mile...they make excellent power and they're ass cheap.....by the way, what cam are you running it the 351
 

·
Registered
Joined
·
6 Posts
Discussion Starter #10
90bronco5.0ho said:
sounds like a nice rig....the edlebrock heads are great heads, I had good luck with the performer rpm's on a sbc 406...made over 500hp..we stuck a set of victor jr's on a another sbc 408 roller motor and with a 175hp nos shot the 4000+lbs 68 chevy truck went 5.93..in the 1/8 mile...they make excellent power and they're ass cheap.....by the way, what cam are you running it the 351


thanx man...its all right, i guess. the cam i am running is part #2182 with 270/280duration 448/472 lift. wish it was a little bigger, idle sounds factory:rebelflag
 

·
Registered
Joined
·
531 Posts
Helloers
 
1 - 14 of 14 Posts
Top