My dad just bought a 90 Bronco and the guy who he bought it from said the overdrive was working before he took it to the body shop and when he got it back it will not shift into overdrive. It shifts smoothly in all gears accept of course overdrive, and the fluid is clean. Where should we start looking??
no overdrive?
1 - 3 of 3 Posts
It is a 302. I think it is the Aod not sure if it is electronic version but I doubt it. It is a 1990 Bronco so whatever came with the 302 in that one. The engine was changed out with a 90 mustang engine but used all the intakes and exhaust ect.. from the original Bronco 302. So only the block and heads were used.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Post a pic of your Bronco
1980-'96 Bronco TechSince the last pic thread got "hard deleted", I figured we oughtta start a new thread. Same rules: year, make, model and specs . NO BS, NO QUOTES, PICS ONLY!!! My junk, 1994 XLT, 5.8L, E40D, 37" Mud Grapplers on basically stock suspension and drivetrain.:banghead The day after I bought it...- 2K
- 1M
-
Ole Nasty · updated
-
Tailgate Window Gets Stuck
1980-'96 Bronco TechI did the tailgate rewire by eighty5eddie after I replaced the tailgate and fixed the wiring debacle the PO left. Now the dash switch works and the key switch works. However when it is all the way up I am not able to get it down and have to use a suction cup to get it down until it is more near...- 11
- 251
-
LOS ANGELES AREA -NEW OWNER- NEED ANY HELP I CAN GET
1980-'96 Bronco TechI recently purchased an 88 Bronco as is is a favorite model SUV since I was a kid. I want it to run it as new and clean as possible without breaking the bank and learning all of the repairs along the way. Is there ANYONE in Los Angeles area that would be willing to meet up and help me out with...- 0
- 16
-
Secretm1Ke · updated
-
Steering component question
1980-'96 Bronco TechSo thanks to all the knowledge on here, I believe I’ve narrowed my steering slop down to a couple of things. In the next few months I would love to order the parts to fix/upgrade my steering. Thinking about either a red head or a blue top gear box but also the Borgeson shaft. Now I know a lot of...- 7
- 137
-
mattmann · updated
-
Handling problems 5.5" lift
1980-'96 Bronco TechI wanted to pick up some cut and turn beams for my bronco because right now I have drop brackets and I'm running 5.5" deaver coils up front with a 4" drop pitman (JBG 5.5" lift). I'm able to get the alignment within spec but it still handles like crap in turns. My tires squeal (sounds like...- 8
- 197
-
Rextec · updated
Join now to ask and comment!