Joined
·
72 Posts
Here's my '96 F-150 I'm close to finishing. But just had to take it out for a rip!
http://www.youtube.com/watch?v=Ro5S3jPWYp0
![]()
http://www.youtube.com/watch?v=Ro5S3jPWYp0
Not my Bronco, but close
1 - 6 of 6 Posts
Joined
·
2,651 Posts
Nice! What are the specs on the truck? And where was that filmed?
Joined
·
578 Posts
Those stepside trucks kick a$s!! How fast were you going???
Joined
·
72 Posts
I was only going about 45mph, but the way it was filmed looks damn impressive! Not much done engine wise
just an efi 302. But the front suspension consists of custom TTB stock width, Radflo 14" Coilovers and 4" Radflo bumps and my own radius arms. The rear is the Giant Motorsports 64" under slung leaf kit with 18" Radflo smooth bodies and 4" bumps. It cycles 17" of front travel and 19" of rear travel. Next to install are my nice new pair of Twisted Stitch seats! :beer It was filmed up here in Canada, we have a big desert orv area up here about 5 minutes from my house!
P.S. It does have a Bronco T-case does that count?
just an efi 302. But the front suspension consists of custom TTB stock width, Radflo 14" Coilovers and 4" Radflo bumps and my own radius arms. The rear is the Giant Motorsports 64" under slung leaf kit with 18" Radflo smooth bodies and 4" bumps. It cycles 17" of front travel and 19" of rear travel. Next to install are my nice new pair of Twisted Stitch seats! :beer It was filmed up here in Canada, we have a big desert orv area up here about 5 minutes from my house!P.S. It does have a Bronco T-case does that count?
Looks like the truck is working well for you. How do you like the spring under set up so far? Thanks for sahring the vid. I have always had a thing for the stepside trucks. If I didnt have the bronco I would probably have gone with a step side. Thanks again for sharing.
jeremy
jeremy
Joined
·
83 Posts
nice... looks like it works pretty well.
1 - 6 of 6 Posts
