[SanDDrag'N]

Not really a wheeling story but all the same i broke my baby

lesson learned 2 never do a hole shot on freshly tared pavement or you will end up with this!

http://steve.pandora-studios.com/images/oops.jpg

http://steve.pandora-studios.com/images/oops3.jpg

http://steve.pandora-studios.com/images/oops4.jpg

 

[Redwagon]

:shocked what type of rr end is that?

 

[massbronco]

looks like a 9

 

[Redwagon]

I dont think so...9 s have a removable third member...I dont see any bolts to remove this one...must be an 8.8.

 

[JB]

not a 8.8

 

[massbronco]

I dont think so...9 s have a removable third member...I dont see any bolts to remove this one...must be an 8.8.

its a 9 look on the outter edges you'll see the bolts under all that grime

 

[psygn0sis]

excuse the french but..... HOLY ****ING SHIT MAN !!!!!! OUCH !!!:shocked

 

[Redwagon]

its a 9 look on the outter edges you'll see the bolts under all that grime

Damn your right:doh0715: someone needs to do a little cleaning.

 

[monkeyhouse]

that was horrible. i wouldnt know what to do if that was my bronco. well id fix it of course, you guys know what i mean.

 

[wheelin_ranger]

been there...done that....:banghead 9 inches don't like 4,000rpm clutch drops with 35 inch tires either...:shocked exact same thing happened except breaking leaf springs

 

[SanDDrag'N]

No stick its an auto. was at a 5 mph roll punched it and boom pieces parts!

and it is a 9"

 

[1970Custom]

Hey, that works great for draining the fluid...even the new stuff.

Time for the JB Weld :toothless

That spring needs a little work as well, maybe some bailing wire. :chili:

Hope you get it fixed.

 

[moldmaker]

damn dude. what kinda power you puttin to the pavement.

 

[Dave's Bronc 90]

Looks like somebody needs traction bars, get rid of that axle wrap. Oh, and a new third member of course. Screw it, looks like a good time to go 1 ton.:thumbup

 

[SanDDrag'N]

Well when building the motor we punched everything into a pc dyno. The motor by that should make around 450 ft lbs of torque at 4800 rpms.

and yeah trac bars are next! all is good though found a 9" out of a linc that has disc brakes and another 9" out of a 78 bronco got them both for $200

 

[quicksilver3602003]

I think i would cry...

 

[quiefinator]

I think i would cry...

mee too, then i would laugh, and then cry again when i had to fix it

 

[F1rocco]

Ready for the dana 60 swap yet????....450 plus hp is just about pushing it...