Bronco Forum - Full Size Ford Bronco Forum banner
1 - 9 of 9 Posts

·
Registered
1984, 300 L6, smogless, manual 3speed with overdrive.
Joined
·
2,319 Posts
Discussion Starter · #1 · (Edited)
Ok guys and gals, I am in need of some parts for my trucks but being on SSI disability my funds are thin.
Here’s what I need for my 84 Bronco and my 86 F350 quad cab

I need the following:
1 tailgate complete (mines rough but could get by for now with a regulator as the pins on mine rusted off)

2 doors 1 on each side

2 hoods

2 passenger side fenders (One will be shaved off up front on the bottom)

1 drivers side fender

2 rear doors for the quad cab

1 pickup tailgate (latch need not be there or work)

I can trade for them as well

I have to trade :
1 black 91 hood (pics if your interested)

1 auto transmission off a 300 L6 (on the shop floor)

misc other parts and some bumpers or trade for a little welding.

If you got any of the above and are at least on the west side of the USA (since there all big parts) hit me up, my mailing zip is 97118 Garibaldi Oregon willing to travel a little for parts and paint color or condition don’t matter
 
  • Like
Reactions: slimpartywagon

·
Registered
Joined
·
1,825 Posts
Ok guys and gals, I am in need of some parts for my trucks but being on SSI disability my funds are thin.
Here’s what I need for my 84 Bronco and my 86 F350 quad cab

1 tailgate complete (mines rough but could get by for now with a regulator as the pins on mine rusted off)

2 doors 1 on each side

2 hoods

2 passenger side fenders (One will be shaved off up front on the bottom)

1 drivers side fender

2 rear doors for the quad cab

I can trade for them as well
I have a black 91 hood pics if your interested

An auto transmission off a 300 L6

misc other parts and some bumpers or trade for a little welding.

If you got any of the above and are at least on the west side of the USA (since there all big parts) hit me up, my mailing zip is 97118 Garibaldi Oregon willing to travel a little for parts and paint color or condition don’t matter
I can hook you up on an AOD in a couple of weeks... pulling mine for a ZF swap...,
I saw a tailgate for the Bronco minus glass down in Boise on Craigslist... genders and doors I can ask my local JY how much he sells them for, I also saw a CL add in the PDX area with hoods, doors and fenders for early 80s fords for like 200 for the whole lot.
 

·
Addicted to Junk
85 Bronco, 309ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
Joined
·
16,339 Posts
Man there are a handful of those body parts in the PnPs in Kansas City... But thats a lot to ship. A pallet to oregon from here is about 400 bucks. Ive bought a hood from them for like 45 bucks.
 
  • Like
Reactions: miesk5

·
Registered
1984, 300 L6, smogless, manual 3speed with overdrive.
Joined
·
2,319 Posts
Discussion Starter · #4 · (Edited)
Ya shipping is a cost and half anymore. I may have typed it wrong I don’t need an aod I have one to trade. I run manuals.

edit: I edited the original
 
  • Like
Reactions: miesk5

·
I ♥ TTB
Joined
·
4,368 Posts
I'll keep my eyes open on this side of the hill for ya, unfortunately I don't have any parts you're after...
 

·
Registered
1984, 300 L6, smogless, manual 3speed with overdrive.
Joined
·
2,319 Posts
Discussion Starter · #7 ·
  • Like
Reactions: GetBent4x4

·
Registered
78 Custom 460 NP435 NP205 Sniper EFI HyperSpark Ignition 4.56 Gears Front/Rear Grizzly Lockers
Joined
·
3,429 Posts
Google maps says that's a 31h drive.


168251
 

·
Premium Member
Joined
·
5,237 Posts
You can probably find rust free parts near major cities in Oregon.

Here's one for you.
Address: 973 SE Monmouth Cutoff Rd, Dallas, OR 97338
Phone: (503) 623-4790

Address: 90579 State Hwy 99 N, Eugene, OR 97402
Phone: (541) 461-4522

Address: 711 Port Dock Rd, Reedsport, OR 97467
Phone: (541) 361-6107

bunch of yards near portland. sometimes the major yards will have guys that will pull parts for cash.
 
1 - 9 of 9 Posts
Top