on the way to work I saw a newer style bronco like mine on the side of the road. It was involved in an accident with a new saturn coupe. The bronco looked like it had about 3 inches of suspension lift on it. The saturn looked like it was now about18 inches shorter, with a substantially downward compressed trunk. the bronco was unscratched.
orlando accident siting.
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
88 351w engine issue, need help!
1980-'96 Bronco TechJust bought this 88 runs good unless you put it under a decent load, (you can accelerate light throttle and it does not do it). When it does it sounds like a lean pop while driving so I was checking fuel pressure, steady 35psi 2 psi deviation at 3500 rpm. I rolled throttle to it pretty quick to...- 0
- 0
-
RPM289 · updated
-
Shorty or Long Tube Headers?
1980-'96 Bronco TechI am looking to gain more power out of my 5.0, so is there any pros or cons of shorty headers being better with more hp and torque, or is long tube headers the way to go?- 10
- 183
-
Planning for a differential upgrade
1980-'96 Bronco TechHi all, I'm starting on the planning phase of my next big project and I would like to tackle the differentials. For starters, my current setup is a stock Dana 44 front / Ford 8.8" rear with 3.55 open differentials. After spinning my tires climbing out of a hole last summer, and tearing chunks...- 244
- 8K
-
AbandonedBronco · updated
-
95's OEM 7-blade trailer plug stopped working... argh. Any experienced help out there?
1980-'96 Bronco TechSo after re-wiring a complete trailer I frustratingly realized that my oem installed 7-blade trailer plug wasn't working right anymore. I'm unsure if the '95 came with a trailer tow package or not, but I don't think so. There's no trailer brakes installed and never have been, near as I can...- 9
- 246
-
BikerPepe` · updated
-
Bad Vibes
1980-'96 Bronco TechHas anyone experienced a vibration at 1500-2000 Rpms. This happens in all gears but most prominently at 1500-2000rpms at 45 MPh. I have a 90 Bronco with the original 351. I have changed plugs, plug Wires, fuel filter, air filter and coil. Any ideas?- 1
- 57
-
Cjaubu · updated
Join now to ask and comment!