Bronco Forum - Full Size Ford Bronco Forum banner

1 - 3 of 3 Posts

11 Posts
Discussion Starter · #1 ·
I ported my box but put plugs in the holes till I get my ram(junkyard box), new lines, good saginaw pump.

I filled the pump, started the truck, let it idle for a minute, top the pump off, let it idle more, top it off again(1 1/2 quarts now) turn the wheel quarter turn and it just gos apesh!t. The wheel starts sawing back and forth about half turn really violently. I thought one of my plugs might have plocked the port to I backed it out a turn or two, no difference. Did I get my lines backward? I had new lines made and I assumed that the 3/8 port was the pressure side. Help please!


*edit* this is on my scout but I used a ford box, thought there might be a difference.
1 - 3 of 3 Posts