[Bruno2]

I am building a 351 Windsor for my Bronco. I am using World Products Windsor Sr. Heads. The roller lifters are Crane energizers and the full roller rocker arms are Crane energizers. The deck was leveled about .010. I need to buy a gauge to check the pushrod length.

Which one do I need there are a couple of different sizes?

http://www.summitracing.com/parts/TFS-9001/

http://www.summitracing.com/parts/TFS-9000/

I appreciate the help!

 

[Bruno2]

TTT!

 

[scld1354]

Info i found says that a stock 5.8 with a flat tappet cam and pedestal rockers uses a 8.182", but this thread (right here) says it's 8.150. Either way, you would use the TFS-9001.

 

[Bruno2]

Cool scld. Crane said I should use an 8" pushrod. So That is the checker I am going to get.

Thanks for replying!

 

[Fireguy50]

5.8L roller cam used a 7.567" pushrod

 

[scld1354]

... which would still be the TFS-9001.

 

[Bruno2]

Yes!