Bronco Forum - Full Size Ford Bronco Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
186 Posts
Discussion Starter #1
I always take my top and doors off for summer. I just found a super easy way to put the top back on. BY YOURSELF! I now am looking for an easier way to put y doors on, Instead of having me hold the door and someone else put all the bolt on and me doing all the final adjustment. What do you do?
 

·
F.O.T.M. - MAY 2014!!!
Joined
·
6,250 Posts
I have seen on here alot of guys use a quick release style hinge. I think they were saying a hinge from a Chevy slid right in, no need to unbolt it. Search for quick release hinge.
Now tell your secret way to put a top on by your self.
 

·
Registered
Joined
·
1,110 Posts
i remove the top by myself, but the pins are removed from my bronco so it just slides out, and i carry it like im a turtle haha. or stand it up straight and put my hands under the lip and carry it
and i replaced the door pins with bolts, so all i have to do is remove the 4 bolts(2 per door) with out aligning the doors, but here is a write up on it,
http://www.fullsizebronco.com/forum/showthread.php?t=73678

im going to go back and modify my bolts for pins when i have time
 

·
I scrape on both sides
Joined
·
3,035 Posts
two twilve and a half inch tires stacked on top of each other and a 30"2x4 to level it out, comes to within half an inch of the height it needs to be at, so just add more to raise it higher... this is with a 6" lift and 35's though
 

·
Low Buck Bum
Joined
·
3,543 Posts
I just slid my top straight off the back onto a couple boards laid across my utility trailer. As for the doors, next spring I'm going to drill the hinge pivots out and replace them with something like this: http://www.hoimport.com/files/QuickSiteImages/3.8_Reciever_Pin_With_B_Ring__2_.jpg. Then when I find another set of doors to make half doors out of, swapping them will be a breeze, no aligning, just pull pins, swap, go wheelin'!
 
1 - 6 of 6 Posts
Top