Joined
·
63 Posts
i can use the mounts off of my 44 and weld them on the D60 to get everything to mount up right?
quick and easy question?
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Clutch going to the floor and not coming up
Noobie Bronco Tech Questions. Flame free zone!We just put a new transmission in it along with a clutch slave cylinder and it was working fine until i went reverse and went to put it in first after stopping the clutch got hard and made a noise and then went to the floor and now i cant start it up and move it does anyone know what the problem is?- 14
- 91
-
JWBronco95 · updated
-
Bikerdude's 89 Broncosaurus and the P.O. blues
Noobie Bronco Tech Questions. Flame free zone!After months of searching for Broncos under the 3 grand range, and going through the pains of seeing chopped and cut on Broncos ( one had a wet rag wedged in the master cylinder reservoir as a cap), I settled on one that had the motor and a list of other things replaced. This seemed to be the...- 75
- 3K
-
Bikerdude · updated
-
Cutting a Borg. steering shaft?
Noobie Bronco Tech Questions. Flame free zone!Where do you cut? At the steering column? Part says 1980-1987 full size Ford but I have a ‘89. I’m assuming the 88s and up have shorter shafts? I just had the steering box replaced with a Motorcraft rebuilt unit. My mechanic messed up my water pump install (over torqued a hose...appears...- 4
- 88
-
Does this ring gear look normal?
Noobie Bronco Tech Questions. Flame free zone!Hi, there’s a guy on Craigslist selling this 8.8 rearend. Says the previous owner swapped in 4.10 gears and it works good. I’m concerned that the ring gear looks really thin. Am I wrong?- 2
- 66
-
67galax · updated
-
Top off
Noobie Bronco Tech Questions. Flame free zone!I took the top off my 95 on Sunday. Does anyone know if they make a molding for where the roof meets the fabric liner and the other sharp edges exposed after the top comes off? Also, is anyone familiar with a roll bar that has a 3rd taillight, spot to hook up seatbelts? Appreciate the help.- 7
- 93
Join now to ask and comment!