[Savvy]

I ran a search and couldn't find exactly what I was looking for. I'm planning to run a 3" cat-back exhaust on my bronco, most likely a flowmaster. I found the kit and was wondering if it just bolts right on or if there is any welding I might have to do. I'm just going to run the single in/out after reading about the brake line problem. Any help would be appreciated.

 

[Fireguy50]

These are my saved exhaust pictures:
http://www.superford.org/registry/vehicles/detail.php?id=1501&s=8841#content
I had everything custom bent.

Might also want to look up Chris Bradley he has a pretty cool 3" exhaust system too.

Don't "have" to weld anything, you could use exhaust clamps, but I welded up my crossover after the exhaust shop bent it up.

 

[nwbronco]

The missus has a custom 3" on her '92. It's sweet! It's connected to long tube Thorley's.
The cat back systems are designed to relpace everything after the catalytic converter. As long as your cat is stock you should be okay.


Bob K.