Bronco Forum - Full Size Ford Bronco Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
2,812 Posts
Discussion Starter · #1 ·
Ok, I have a question concerning radius arms. My stock ones are bent inward, right at the point where the tires would/do rub on them....was just wondering this could have happened in the 3 months I ran the 33's on the bronco or something that happens with time and age?
And how much of an improved ride will I have with NEW ones..
Thanks guys. :thumbup
 

·
Registered
Joined
·
2,812 Posts
Discussion Starter · #4 ·
Ok......
I don't have pics right now and no digi cam.......soonest would be tomorrow night.
A friend of mine looked at them and thought they were a bent a bit more than they should be.......he didn't remember his looking like that.
Just wanted to get some input. :thumbup
 

·
CheeseBurger Milkshake!!
Joined
·
3,760 Posts
The stock radius arms are extremely durable..........it took a 30+mph impact with a Toyota Corola station wagon to bend my driver's side radius arm. It bent just enough to notice it.

I've been driving it this way for the last 7 months.:brownbag
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top