Bronco Forum - Full Size Ford Bronco Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
I searched and didn't find anything. Has anyone raised there tranny to get a flat skid plate on?

Sorry if this has been covered.
 

·
Rest in Peace Friend...
Joined
·
3,220 Posts
When Iswapped the C6 auto from the 88 F-350 into my 84 Bronco, I first tried using the F-350 tranny mount. It was too tall, and the tranny hit the bottom of the floor. I had to switch back to the Bronco crossmember and old-style bushing mounts. There is maybe 2 inches of room between the tranny and the floor now, so there's no way that I could see raising it up enough to where the pan or t-case rides up in the frame. In fact, I had to add 1" blocks to the skid plate wheree it bolts to the frame to clear the B-W 13-56 t-case. JSM84
 
1 - 2 of 2 Posts
Top