Bronco Forum - Full Size Ford Bronco Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,734 Posts
are you testing with the door open? the safety latch might not be adjusted correctly. the motor should work fine with or without the pins. fast check use a volt meter to see if power is going to the motor whenyou select a direction. Look at the wire between the gate and drivers side bed rail. sometimes the wires like to break from the bending.......mike
 

·
Registered
Joined
·
2,734 Posts
is the arm bent or the long "J" hook that detects if the window is all the way down out of adjustment. it is a basic simple system but it does have issues. have you pushed hard on the driver side of the gate and see if the window moves? i bet the safety latch is not working correctly. (main reaso i bypassed mine. i do no have any pictures of mine and just the latch on goodle, steve83 has some pictures on his site...mike
 
1 - 2 of 2 Posts
Top