Joined
·
769 Posts
Edited....only getting rid of tranny and mabey motor
saying goodbye to the 79.......
Join the discussion
Recommended Reading
-
78/79 Bronco: bigger tires - speedo adjustment + single seats + HELLO !!
1978-'79 Bronco TechHello FSB folks I am new to this forum and absolutly new to Ford Broncos. I am living in Germany and want to have an "old" rig out of the year 78/79 and I am currently searching the whole US for good cars (not looking for a perfect car, but at least a good one without need of welding/bodywork) -...- 19
- 843
-
simrokkzz · updated
-
Clutch fork
1978-'79 Bronco TechHello guys. Been a while I have a hole worn into the clutch fork where the adjustable rod pushes on the fork to Engage the clutch In time it will fail Is there a way to replace the fork lever without removing the transmission? Is this a common problem? Iam considering welding a nut to the end...- 1
- 55
-
2150 Carb Rear Fitting to PVC
1978-'79 Bronco TechI have this small metal tube fitting at the base of my carb that keeps popping out. This line heads to the driver side pvc valve on the valve cover. Can this metal tube just be glued in? Sent from my iPhone using Tapatalk Pro- 1
- 68
-
grovermyson · updated
-
Transmission
1978-'79 Bronco TechCan anyone decode this tag? Need a c6 for our 351M and found this one on the farm. Think it came off a 351M on a car thought.- 0
- 53
-
macgyver126 · updated
-
Steering upgrade/fix checklist?
1978-'79 Bronco TechMy '79 has a reasonable sized dead spot in the steering and wanders a little. I just put 35" tires on and that has exacerbated the problem a little. It was already fatigueing to drive on the freeway because of how much attention and input it needed. It's not where I'd consider it really unsafe...- 7
- 192
-
cwegga · updated
Join now to ask and comment!