Bronco Forum - Full Size Ford Bronco Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
I met this guy in class the other day and ive been trying to find some info for him. Hes got a 94 fsb and a 3" bl. Hes currently running 33x12.50's on a 15x10 wheel w/ a 4" backspacing...No problems at all with rubbing. But hes in the market for some new tires. Hes wanting a set of 35x12.50's but i dont see how they will fit without trimming. Onlything hes done to the truck body wise was lose the front bumper. I'm sorry if this has been discussed, but I told him i'd find out for him, but i suggested against it with the factory gears, and jsut a 3" BL but he wouldnt listen.
 

·
Registered
Joined
·
1,811 Posts
The leading edge of the rear fender openings is a known trouble spot with 35's and a body lift. It may work or it may not. He should go out and measure. I would suspect that the rear edge of the front fenders would be awful close as well. Again, measure.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top