Bronco Forum - Full Size Ford Bronco Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1 (Edited)
okay so I have a 92 sd f150 5.0 5spd 4x4 and a 94 maf f150 5.0 auto(4r70w) 2wd and want to swap the maf system from the 94 to the 92. How easy/difficult will this be and on a side note both trucks are complete and running just the 94 is totaled out got rearended by some idiot to busy looking at it than paying attention:twak
 

·
Super Moderator
Joined
·
26,086 Posts
yo 965,

This may help;
Speed Density to Mass Air Conversion & Parts List in an 89 F250 5.8 Manual Transmission
Source: by itsacrazyasian at FSB http://fullsizebronco.com/forum/showthread.php?t=150301


Speed Density to Mass Air Conversion & Parts List with Cost for Bronco & F150
Source: by Ryan M (Fireguy50) at
http://web.archive.org/web/20110707042759/http://www.fordfuelinjection.com/?p=62

Electronic Fuel Injection MAF conversion for a 1988 Ford F150
http://www.fordmuscle.com/archives/2005/10/MassAirConversion/
must register for page 2 & 3


Custom Air Intake and MAF Conversion
http://blogarchive.brembs.net/cars/maf_conversion/
by Bjorn Bremb



Speed Density to Mass Air Conversion for EFI in an 89 357W
Source: by Tim C (TnTbronco2, Trail Truck, Street Truck, Crazed, Broke, OoG) at
http://www.supermotors.net/clubs/superford/registry/1725/27217
Tim has ZF5 5 Speed manual transmission


EEC IV Connector Pin Depiction Pic and LEGEND by Ryan M (Fireguy50)
http://web.archive.org/web/20131229163930/http://oldfuelinjection.com/images/eec04.gif

http://web.archive.org/web/20131029020805/http://oldfuelinjection.com/truckpinouts.html
 

·
Registered
Joined
·
21 Posts
Discussion Starter #3
that's some great info there but i guess i asked the wrong ? what i want to know is can i take the ecu maf and harness from the 94 and drop it on the 92, with wiring changes only for the trans side of things
 
1 - 4 of 4 Posts
Top