Bronco Forum - Full Size Ford Bronco Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey everyone I'm new :D But i wanted to get everyones opinion. I'm planning on buying an 89' bronco that has a 427 stroker the seller offered to lower the price 3k if i put in a different engine (rebuilt 351) and give back the longblock....

Lemme know...Thanks!!

Els
 

· aka: kemicalburns
Joined
·
8,171 Posts
how much is he askin total with the motor?
 

· Registered
Joined
·
402 Posts
the stroker motor could be worth over 3000$ depending on what heads ,intake,cam and carb or fuel injection are on it. Plus how much is your time and aggrevation worth to r&r the motor. There is no substitute for cubic inches.
 

· FSB warrior
Joined
·
4,831 Posts
Midnight Rider said:
the stroker motor could be worth over 3000$ depending on what heads ,intake,cam and carb or fuel injection are on it. Plus how much is your time and aggrevation worth to r&r the motor. There is no substitute for cubic inches.
Depends on how new the motor was... but I havent built a normal stroked 302 for anything less then 5 grand. How much are they askin total for the truck????
 

· OUT OF BUSINESS / M.I.A.
Joined
·
9,690 Posts
I agree, $3000 sounds cheap for a quality stroker. To fuel inject an engine like that properly would cost $750-$1250. Quality short block would be $3000 new, heads are $800-$1100.

If everything is of good quality, built properly, and injected properly 3K is a great deal
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top