Bronco Forum - Full Size Ford Bronco Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
541 Posts
Discussion Starter · #1 ·
i have a 96xlt. i was currious how i could get the side badges off. are they the ones with the tape or do they punch through the fender? any help would be great. thanks in advance:thumbup
 

·
www.easttn4x4.com
Joined
·
2,191 Posts
edluvsbronc said:
i have a 96xlt. i was currious how i could get the side badges off. are they the ones with the tape or do they punch through the fender? any help would be great. thanks in advance:thumbup
They have a black tar like glue and little pegs that line them up through the fender. Basically just pry them off. Often the glue will still hold when you put them back on.
 

·
Registered
Joined
·
541 Posts
Discussion Starter · #3 ·
Gub_Ni said:
They have a black tar like glue and little pegs that line them up through the fender. Basically just pry them off. Often the glue will still hold when you put them back on.
but iff i take them off will i have holes in the side of my truck?
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top