Bronco Forum - Full Size Ford Bronco Forum banner

Spare tire/jerry can carrier

287 Views 6 Replies 5 Participants Last post by  fodder
6
I built this with a lincoln electric flux core MIG welder. I thought some of you may need some inspiration on how to go about it. I bought the spindle kits on Amazon and just used black iron pipe. It works well and this is not completely finished quite yet. I'm open to constructive criticism and opinions. If it turns to a popular topic, I may do a write up.
Automotive parking light Tire Wheel Vehicle Automotive side marker light

Tire Wheel Vehicle Sky Plant

Automotive parking light Car Automotive side marker light Tire Vehicle

Tire Wheel Land vehicle Vehicle Car

Automotive parking light Tire Wheel Car Land vehicle

Vehicle Car Hood Grille Automotive lighting
See less See more
  • Like
Reactions: 2
1 - 1 of 7 Posts
Looks good, except the latch. Do you just have one side latching to the other?

In that situation, i would use what is called a door bar connector for roll cages in race cars. I dont see the current latch holding up to much offroad abuse.
1 - 1 of 7 Posts
Top