Bronco Forum - Full Size Ford Bronco Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
175 Posts
Discussion Starter #1
Alright i have had problems with my coils going out. I have a 351m new engine with 2000miles. As soon as the weather heats up the coil goes bad.
So now i got a new coil and changed the module. Now it acts like it want to start and as soon as i release the key it turns off. Could it be the key ingition
 

·
Registered
Joined
·
175 Posts
Discussion Starter #2
so if i have to change out the ignition switch do i have to pull the steering wheel. and drop colum. or can you replace it without doing all that crap.
 

·
Registered
Joined
·
175 Posts
Discussion Starter #3
Alright i got my manual and before i looked for the problem i changed the coil and i turned the key with the alarm on and it turned on. The engine ran and the alarm too. As soon as i turned the alarm off the engine turned off.
So i turned it on again with the alarm on. the second i turned the alarm off the engine turned off too.

So I crossed some wires when i wired the ignition module. I will have to wait till morning so i can see better.
I cant find it in my manual though.
I have a 2 prong module and i cant find it
 
1 - 4 of 4 Posts
Top