Bronco Forum - Full Size Ford Bronco Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter #1
I have an '86 FSB..with 6" lift running 35"s..I want to bigger on my lift but i have to swap my IFs for a solid axle..just curious what are my options on axles ..also what year models can i get these axles from
 

·
Registered
Joined
·
7,167 Posts



This has been well covered.
Someone please lock this post.:banghead :banghead :banghead :banghead
 

·
negative creep
Joined
·
8,651 Posts
you will need to find a Dana 30 from a TJ as they are the only other straight axles that use coils. then you will have to have to axles and tubes lengthened to full width.

:goodfinge
 

·
Registered
Joined
·
3,371 Posts
dont mind the hazeing mudder78, that happens to all the new guys who havnt learned there way around the site yet. BA does have some really good axles for that swap. if you use the search like beerman linked you too, you will find tons of info from guys here who have done much reseach and from their actual experiances. check out badass's superford page, dustins, dblue351, nobs, keithL, and many others on this site. you can see step by step what they did, and what worked best for them. d44, d60, spring, coil, whatever.
hope this helps.
 
1 - 7 of 7 Posts
Top