Bronco Forum - Full Size Ford Bronco Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
315 Posts
im making one right now, mine was rusted through...

by "making one right now", i mean i cut a steel plate into five peices and they have been sitting in my garage now for a week waiting for me to be motivated enough to weld them together..

2" lip on each side, 9 or 10" angled down the back side, about 15" accross the bottom and about 10 or 11" back up the other side, all the width of the tank and 1/4" thick ... i think i dont feel like running out with a tape measure but you get my idea.
 
1 - 3 of 3 Posts
Top