Bronco Forum - Full Size Ford Bronco Forum banner
1 - 2 of 2 Posts

·
Charlie don't surf..
'92 Ford Bronco XLT
Joined
·
16,526 Posts
Sounds like you got a t-case from a pickup truck. The tail shaft on a Bronco is much shorter. You can see the difference in this pic. You'll also need the tailshaft housing from the Bronco. Or you could just swap them of the one that is already in your rig.

 

·
Charlie don't surf..
'92 Ford Bronco XLT
Joined
·
16,526 Posts
You're going to want to do a rebuild on that case before installing it, so why not tear it down and use the tailshaft from your Bronco so you don't have to screw around with a slip yoke.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top