Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

· CheeseBurger Milkshake!!
3,838 Posts
It's been awile since I've change one......if I remember correctly, the crossmember has to be unbolted and slid back before the mount can be changed. The transfer case can stay in place.

If you decide to support the trans by the pan, use a 2x6 on top of the jack to help distribute the weight, reducing possible damage to the pan. You might also be able to support everything with the t-case.

Good Luck!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.