So ran into a new fun issue this weekend. Had no lights at all in the rear (brake, marker, parking, blinkers)- checked and replaced all bulbs, they were in pretty rough shape. This brought back all lights, but then the fun started. When I place the turn signal switch into L position it works on the rear only, the R position is the same thing. When I move the switch to the 'Off' position, both rear blinkers run continuously, as though the hazards were engaged. From what I've read this sounds like a possible TSS cam issue- I pulled the steering wheel and cleaned the connectors, but to no avail. Hoping someone may have some insight.